Plug and Play Timecode
Instead of using the graphical menu of the Lockit (pressing Red & Green simultaneously) or the LockitToolbox you can feed in timecode and frame rate externally.
Just plug one NanoLockit to the TC Out port of another device (e.g. your Sound Recorder) and it will automatically take over timecode and frame rate.
Note: This only works if no Single Jam has been sent - or a C-Jam / TX Master is active in the ACN channel. Indicated by the LED flashing red and green alternately.
Timecode compare mode for Lockit devices with an OLED
If the device is already jammed and you attach an external time- code source, you can enter the “Compare Screen”. This displays a potential timecode drift between external source and your Lockit.
Enhanced compare mode with the Lockit+
Within the web interface of the Lockit+ you can analyze the LTC-input and compare it to the internal Lockit generator - not only the actual timecode difference but also the generator speed.